| ACTUATOR ADAPTER STYLE | PUSHBUTTON |
| ACTUATOR FREE POSITION HEIGHT | 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ACTUATOR HEIGHT | 0.125 INCHES NOMINAL |
| ACTUATOR LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ACTUATOR STYLE | RECTANGULAR |
| ACTUATOR WIDTH | 0.281 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| ACTUATOR MOVEMENT | 0.060 PRETRAVEL INCHES MAXIMUM AND 0.015 OVERTRAVEL INCHES MINIMUM AND 0.035 DIFFERENTIAL INCHES MAXIMUM |
| BODY HEIGHT | 0.890 INCHES MAXIMUM |
| BODY LENGTH | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| BODY STYLE | HOLE MOUNTED |
| BODY WIDTH | 0.515 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 15.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 10.000 AMPERES MOTOR DC AND 15.000 AMPERES RESISTIVE AC AND 15.000 AMPERES INDUCTIVE AC AND 6.000 AMPERES MOTOR AC |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | FLAME RESISTANT |
| INCLOSURE TYPE | UNINCLOSED |
| OVERALL HEIGHT | 1.015 INCHES NOMINAL |
| OVERALL LENGTH | 1.687 INCHES MAXIMUM |
| OVERALL WIDTH | 0.515 INCHES MAXIMUM |
| MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC AND 28.0 DC |
| MOUNTING METHOD | UNTHREADED HOLE |
| NONPILE-UP CONTACT ARRANGEMENT | 2 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-8805/15 GOVERNMENT SPECIFICATION |
| SWITCH ACTUATING FORCE | 34.8 OUNCES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.114 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |