| CONTACT LOAD CURRENT RATING | 100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +10.000 TO 65.000 INCH-OUNCES SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.313 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.200 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 2 |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL AT 2:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 2:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| OVERALL HEIGHT | 1.047 INCHES MAXIMUM |
| OVERALL LENGTH | 1.950 INCHES NOMINAL |
| OVERALL WIDTH | 1.000 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| POLE QUANTITY | 1 2ND SECTION REAR |
| POLE QUANTITY | 2 1ST SECTION REAR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.813 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 EACH SECTION REAR |