CONTACT LOAD CURRENT RATING | 150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD AND 30.0 MILLIAMPERES INDUCTIVE LOAD AND 100.0 MILLIAMPERES LAMP LOAD DC AT SEA LEVEL |
CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION REAR |
CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
DETENT ROTATIONAL TORQUE RANGE | +0.500 TO 1.500 INCH-POUNDS SINGLE ACTUATOR |
FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
FLAT HEIGHT | 0.093 INCHES NOMINAL SINGLE ACTUATOR |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
INDIVIDUAL SECTION QUANTITY | 1 |
NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 O'CLOCK |
NONTURN DEVICE TYPE | FLATTED BUSHING AT 9:00 O'CLOCK |
OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
OVERALL DIAMETER | 0.500 INCHES NOMINAL |
OVERALL LENGTH | 1.338 INCHES NOMINAL |
MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
POLE QUANTITY | 2 SINGLE SECTION REAR |
SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE ACTUATOR |
SHAFT LENGTH | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
SHAFT FLAT/SLOT ANGULAR LOCATION | 198.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
SPECIFICATION/STANDARD DATA | 81349-MIL-S-3786/20 GOVERNMENT SPECIFICATION |
STYLE DESIGNATOR | SNAP OR LINE |
SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES SINGLE ACTUATOR |
SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
TERMINAL TYPE | TAB, SOLDER LUG |
TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
THREAD LENGTH | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
THREAD SERIES DESIGNATOR | UNF SINGLE MOUNTING FACILITY |
THROW QUANTITY | 4 SINGLE SECTION REAR |