| CONTACT LOAD CURRENT RATING | 150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD AND 30.0 MILLIAMPERES INDUCTIVE LOAD AND 100.0 MILLIAMPERES LAMP LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +0.500 TO 1.500 INCH-POUNDS SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.093 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 1 |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 9:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 1.338 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| POLE QUANTITY | 2 SINGLE SECTION REAR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 210.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-3786/20 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | SNAP OR LINE |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 60.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 SINGLE SECTION REAR |