5925-01-342-9481, CIRCUIT BREAKER

National Stock Number:
5925-01-342-9481

Federal Supply Class:
5925

National Item Identification Number:
013429481

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

AP1-1-52-302

81541

SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
BODY LENGTH	1.562 INCHES MAXIMUM
BODY STYLE	SINGLE POLE TYPE
BODY WIDTH	0.625 INCHES MAXIMUM
BUSHING LENGTH	0.380 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.875 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
FREQUENCY IN HERTZ	400.0 SINGLE LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC SINGLE LOCATION
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	3.0 AMPERES AC SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.605 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.375 INCHES
POLE QUANTITY	1
RESET METHOD	MANUAL
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	MAGNETIC SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 SINGLE LOCATION
TERMINAL TYPE AND QUANTITY	2 WIRE HOOK
THREAD PITCH DIAMETERS	+0.3503 TO 0.3537 INCHES
THREAD SERIES DESIGNATOR	UNEF
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.055 MINIMUM AT 200 PCT AND 0.950 MAXIMUM AT 200 PCT SINGLE LOCATION

Click here to Register for Free 30-day Trial