5925-01-342-5706, CIRCUIT BREAKER

National Stock Number:
5925-01-342-5706

Federal Supply Class:
5925

National Item Identification Number:
013425706

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

M55629/20HN	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-55629/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-55629/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
AUXILIARY SWITCH FUNCTION AND QUANTITY	1 ALARM
BODY LENGTH	2.000 INCHES NOMINAL
BODY STYLE	SINGLE POLE TYPE
BODY WIDTH	0.750 INCHES NOMINAL
BUSHING LENGTH	0.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.530 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	60.0 SINGLE LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	HERMETICALLY SEALED
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
NONTURN DEVICE DIAMETER	0.140 INCHES NOMINAL
NONTURN DEVICE LENGTH	0.130 INCHES NOMINAL
NONTURN DEVICE RADIUS	0.656 INCHES NOMINAL
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC SINGLE LOCATION
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	2.5 AMPERES AC SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.232 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.375 INCHES
POLE QUANTITY	1
RESET METHOD	MANUAL
SPECIAL HANDLING FEATURE	MAGNETIC
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 SINGLE LOCATION
SPECIFICATION/STANDARD DATA	81349-MIL-C-55629/20 GOVERNMENT SPECIFICATION
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
SWITCH LOCATION AND POSITION DESIGNATION	INTERNAL AT POLE ONE
SWITCH TERMINAL TYPE	TAB, SOLDER LUG
SWITCH VOLTAGE RATING AND TYPE IN VOLTS	120.0 AC AND 50.0 DC
SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW
SWITCH CURRENT RATING AND TYPE IN AMPS	1.0 AC AND 0.5 DC
TERMINAL TYPE AND QUANTITY	2 TAB W/SCREW
TEST DATA DOCUMENT	81349-MIL-C-55629 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD SERIES DESIGNATOR	UNEF
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.050 MINIMUM AT 200 PCT AND 10.000 MAXIMUM AT 200 PCT SINGLE LOCATION

Click here to Register for Free 30-day Trial