5925-01-222-9108, CIRCUIT BREAKER

National Stock Number:
5925-01-222-9108

Federal Supply Class:
5925

National Item Identification Number:
012229108

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

AM1-Z496-5	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
APL2-9739-27	81541	SENSATA TECHNOLOGIES MARYLAND, INC
SM-A-988733-27	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
ARC QUENCHING METHOD	AIR
BODY LENGTH	2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
BODY STYLE	SINGLE POLE TYPE
BODY WIDTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
BOSS HEIGHT	0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
CASE MATERIAL	PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE	OVERVOLTAGE SINGLE LOCATION
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	50.0 OR 60.0 SINGLE LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SINGLE LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SHUNT TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	17.0 AMPERES AC SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED HOLE
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.461 INCHES MINIMUM AND 2.481 INCHES MAXIMUM
RESET METHOD	MANUAL
POLE QUANTITY	1
THREAD PITCH DIAMETERS	+0.1177 TO 0.1214 INCHES
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.200 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	MAGNETIC SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	3 THREADED STUD

Click here to Register for Free 30-day Trial