5925-01-062-4829, CIRCUIT BREAKER

National Stock Number:
5925-01-062-4829

Federal Supply Class:
5925

National Item Identification Number:
010624829

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

APL1111-2821-1

81541

SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.050 INCHES MINIMUM AND 2.070 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
BODY LENGTH	2.480 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	3.015 INCHES MAXIMUM
BOSS HEIGHT	0.135 INCHES MINIMUM AND 0.165 INCHES MAXIMUM
CASE MATERIAL	PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.925 INCHES MINIMUM AND 1.955 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, THREE, AND FOUR LINKED
FREQUENCY IN HERTZ	400.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	CORROSION RESISTANT AND MOISTURE RESISTANT
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.491 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	115.0 AC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	4 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	15.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1500.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	8 THREADED HOLE
RESET METHOD	MANUAL
POLE QUANTITY	4
THREAD PITCH DIAMETERS	+0.1177 TO 0.1214 INCHES
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.200 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	8 THREADED STUD
TEST DATA DOCUMENT	13499-260-1016 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial