5925-01-042-1805, CIRCUIT BREAKER

National Stock Number:
5925-01-042-1805

Federal Supply Class:
5925

National Item Identification Number:
010421805

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

AS22073	0U583	SAE INTERNATIONAL
AS22073	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AS58091	0U583	SAE INTERNATIONAL
AS58091	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MIL-C-5809	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS22073-5V	0U583	SAE INTERNATIONAL
MS22073-5V	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS22073-5V	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS58091	0U583	SAE INTERNATIONAL

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
BODY LENGTH	0.780 INCHES MAXIMUM
BODY STYLE	SINGLE POLE TYPE
BODY WIDTH	0.593 INCHES MAXIMUM
BUSHING LENGTH	0.273 INCHES MINIMUM AND 0.293 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.672 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
FREQUENCY IN HERTZ	400.0 SINGLE LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	CORROSION RESISTANT AND DUSTPROOF AND EXPLOSION PROOF AND FUNGUS RESISTANT AND MOISTURE RESISTANT AND SAND RESISTANT AND VIBRATION RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	200.0 AC AND 28.0 DC SINGLE LOCATION
MANUAL ACTUATOR TYPE AND QUANTITY	1 PUSH-PULL
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	100.0 AC AND 100.0 DC SINGLE LOCATION
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	5.0 AMPERES AC AND 5.0 AMPERES DC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.812 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.469 INCHES
POLE QUANTITY	1
RESET METHOD	MANUAL
TRIP RELEASE AMBIENT TEMP RATING	25.0 CELSIUS NOMINAL SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	THERMAL SINGLE LOCATION
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	145.0 SINGLE LOCATION
SPECIFICATION/STANDARD DATA	96906-MS22073 GOVERNMENT STANDARD
TERMINAL TYPE AND QUANTITY	2 SCREW
TEST DATA DOCUMENT	81349-MIL-C-5809 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD SERIES DESIGNATOR	UNS
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial