5925-00-755-2461, CIRCUIT BREAKER

5905-00-755-2453 RESISTOR,VARIABLE,NONWIRE WOUND,

5905-00-755-2463 RESISTOR,FIXED,COMPOSITION

National Stock Number:
5925-00-755-2461

Federal Supply Class:
5925

National Item Identification Number:
007552461

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

3XAM1516MG3-5AMP416VAC400C2	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
9174560	18876	U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
BODY LENGTH	3.790 INCHES MAXIMUM
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	3.062 INCHES NOMINAL
BOSS HEIGHT	0.156 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	3.062 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	2.062 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	2.062 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, AND THREE LINKED
FREQUENCY IN HERTZ	400.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	3 TOGGLE
MATERIAL	PLASTIC CASE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	5.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1300.0 AC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	6 THREADED HOLE
MOUNTING SURFACE TO TERMINAL END DISTANCE	3.310 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	416.0 AC ALL LOCATIONS
POLE QUANTITY	3
RESET METHOD	MANUAL
TERMINAL TYPE AND QUANTITY	6 THREADED STUD
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	14.000 MINIMUM AT 150 PCT AND 50.000 MAXIMUM AT 150 PCT AND 6.000 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT AND 2.000 MINIMUM AT 300 PCT AND 6.500 MAXIMUM AT 300 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS

Click here to Register for Free 30-day Trial