|
|
|
National Stock Number:
5920-00-686-2587
Federal Supply Class:
5920
National Item Identification Number:
006862587
Description:
FUSEHOLDER,BLOCK
Detail:
A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
|
Manufacturer Information:
| MILF5373 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24001-2 | 0U583 | SAE INTERNATIONAL | | MS24001-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS53731 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| ACCOMMODATED FUSE LENGTH | 0.391 INCHES NOMINAL | | BASE THICKNESS | 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | BODY MATERIAL | PLASTIC, MELAMINE, MIL-M-14, TYPE MME AND PLASTIC, SILICONE, MIL-M-14, TYPE MSI-30 | | BODY STYLE | SIDE BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM | | CONTACT MATERIAL | COPPER-BERYLLIUM, QQ-C-530 OR COPPER-BERYLLIUM, QQ-C-533 | | CONTACT SURFACE TREATMENT | SILVER PLATED, QQ-S-365 | | CURRENT CARRYING RATING IN AMPS | 60.0 | | FUSE ACCOMMODATION QUANTITY | 2 | | FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE | | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 2 POLE, MAINLINE, FUSED | | OVERALL HEIGHT | 1.016 INCHES MAXIMUM | | OVERALL LENGTH | 3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM | | OVERALL WIDTH | 1.594 INCHES MAXIMUM | | MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | MOUNTING HOLE QUANTITY | 2 | | MOUNTING HOLE STYLE | DIAGONAL TO THE LEFT | | TERMINAL SURFACE TREATMENT | CADMIUM, QQ-P-416 | | TERMINAL TYPE AND QUANTITY | 4 SCREW | | TEST DATA DOCUMENT | 81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|