| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 1.0 MINIMUM BLANK AND 40.0 MAXIMUM BLANK |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.800 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.400 INCHES NOMINAL |
| AVERAGE LIFE RATING IN HOURS | 43800.0 |
| AVERAGE POWER RATING PER FUNCTION | 220.0 WATTS BLANK |
| BODY MATERIAL | ALUMINUM |
| BODY SURFACE TREATMENT | CADMIUM |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 RECTANGULAR FLANGE INPUT 1ST FUNCTION1 RECTANGULAR FLANGE OUTPUT 2ND FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 6.50 GIGAHERTZ BLANK AND 8.20 GIGAHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 0.8 BLANK |
| INSIDE WIDTH | 0.820 INCHES NOMINAL |
| INSIDE HEIGHT | 0.620 INCHES NOMINAL |
| LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| INPUT TERMINAL IDENTIFICATION | 2622634G004 |
| INPUT TERMINAL MANUFACTURER CODE | 28527 |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | WAVEGUIDE BLANK |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| OPERATING TEMP RANGE | +0.0/+55.0 DEG CELSIUS |
| OUTPUT TERMINAL IDENTIFICATION | 2622634G002 |
| OUTPUT TERMINAL MANUFACTURER CODE | 28527 |
| OVERALL HEIGHT | 6.500 INCHES NOMINAL |
| OVERALL LENGTH | 13.970 INCHES MINIMUM AND 14.030 INCHES MAXIMUM |
| OVERALL WIDTH | 1.800 INCHES NOMINAL |
| REFERENCE FREQUENCY PER FUNCTION | 7.35 GIGAHERTZ BLANK |
| SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 3.00 GIGAHERTZ BLANK AND 6.50 GIGAHERTZ BLANK AND 8.20 GIGAHERTZ BLANK AND 12.00 GIGAHERTZ BLANK |
| VIBRATION RESISTANCE RANGE IN HERTZ | +10.0/+500.0 |
| VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION | 6.5 GIGAHERTZ BLANK AND 8.2 GIGAHERTZ BLANK |
| VOLTAGE STANDING WAVE RATIO PER FUNCTION | 1.25 BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL |