|
|
|
National Stock Number:
5915-01-063-7998
Federal Supply Class:
5915
National Item Identification Number:
010637998
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 0N228032-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| BODY LENGTH | 0.200 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.410 INCHES MAXIMUM | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT AND 1 TAB, SOLDER LUG OUTPUT | | INCLOSURE TYPE | ENCASED | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 10.0 BLANK | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 50.0 VOLTS DC BLANK | | OVERALL LENGTH | 0.732 INCHES MAXIMUM | | MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 160.0 KILOVOLTS AT ALTITUDE | | MAXIMUM VOLTAGE DROP PER FUNCTION | 800.0 MILLIVOLTS DC BLANK | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK | | SPECIAL FEATURES | RADIOGRAPHIC EXAMINED,EA ITEM ASSIGNED UNIQUE SERIAL NO. | | VIBRATION RESISTANCE RANGE IN HERTZ | +10.0 TO 2000.0 | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 98230-0N228032-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|