|
|
|
National Stock Number:
5915-01-059-6754
Federal Supply Class:
5915
National Item Identification Number:
010596754
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 0N241893-2 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| BODY LENGTH | 0.732 INCHES MINIMUM AND 0.794 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.385 INCHES MAXIMUM | | BODY SURFACE TREATMENT | TIN | | INCLOSURE TYPE | HERMETICALLY SEALED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK ALL FUNCTIONS | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 0.25 BLANK ALL FUNCTIONS | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | OVERALL LENGTH | 1.443 INCHES MINIMUM AND 1.503 INCHES MAXIMUM | | MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 100.0 VOLTS AT SEA LEVEL | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK ALL FUNCTIONS | | SPECIAL FEATURES | W/INTL TOOTH LOCKWASHER 0.025 IN.THK X 0.405 IN. DIA | | VIBRATION RESISTANCE RANGE IN HERTZ | +10.0 TO 2000.0 | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 98230-0N241893-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|