|
|
|
National Stock Number:
5915-01-005-9444
Federal Supply Class:
5915
National Item Identification Number:
010059444
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| CDF1003-N | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. | | CDF1603-N | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. | | E-1754 | 23160 | LINDGREN RF ENCLOSURES INC ELMAG DIV | | NHCDF1603-N | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | OD-RF14034-4 | 13619 | EMS DEVELOPMENT CORPORATION | | RF14034-4 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY LENGTH | 2.250 INCHES MAXIMUM | | BODY MATERIAL | METAL | | BODY OUTSIDE DIAMETER | 1.938 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | ENCASED | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 100.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 115.0 VOLTS AC BLANK | | OVERALL LENGTH | 4.750 INCHES MAXIMUM | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK | | SPECIAL FEATURES | NUCLEAR HARDNESS CRITICAL ITEM | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | UNTHREADED MOUNTING HOLE DIAMETER | 0.218 INCHES NOMINAL |
|
|