|
|
|
National Stock Number:
5915-00-787-2115
Federal Supply Class:
5915
National Item Identification Number:
007872115
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 146468-10 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | RF00564-10 | 13619 | EMS DEVELOPMENT CORPORATION | | RF564-10 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| AVERAGE LIFE RATING IN HOURS | 1000.0 | | BODY LENGTH | 4.218 INCHES MINIMUM AND 4.282 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 1.718 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | HERMETICALLY SEALED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL LENGTH | 5.499 INCHES NOMINAL | | MAXIMUM VOLTAGE DROP PER FUNCTION | 0.4 MILLIVOLTS AC BLANK | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.625 INCHES | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 10.0 BLANK | | OPERATING TEMP RANGE | -15.0 TO 125.0 CELSIUS | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 130.0 VOLTS AC BLANK | | POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 400.0 BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 00752-14660-10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|