5910-01-351-5528 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5910-01-351-5530 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5910-01-351-5529

Federal Supply Class:
5910

National Item Identification Number:
013515529

Description:
CAPACITOR,FIXED,ELECTROLYTIC

Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.


Manufacturer Information:
M39018/09-0051M81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39018/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL POLARIZATIONPOLARIZED
ANODE TYPEPLAIN FOIL
BODY DIAMETER0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
BODY LENGTH1.063 INCHES MINIMUM AND 1.187 INCHES MAXIMUM
BODY STYLEW/O MTG FACILITIES, TERMINAL(S) ON ONE END
CAPACITIVE ELECTRODE MATERIALALUMINUM
CAPACITANCE VALUE PER SECTION330.000 MICROFARADS SINGLE SECTION
CASE INSULATION MATERIALPLASTIC
CASE MATERIALMETAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
DC LEAKAGE AT MAXIMUM OPERATING TEMP298.0 MICROAMPERES
DC LEAKAGE AT REFERENCE TEMP49.000 MICROAMPERES
EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS0.238
IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS0.071
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION30.0 DC SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT1.000
RELIABILITY INDICATORESTABLISHED
SCHEMATIC DIAGRAM DESIGNATORELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
SPECIFICATION/STANDARD DATA81349-MIL-C-39018/9 GOVERNMENT SPECIFICATION
TERMINAL DIAMETER0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM
TERMINAL LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
TERMINAL SURFACE TREATMENTSOLDER
TERMINAL TYPE AND QUANTITY3 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TOLERANCE RANGE PER SECTION-10.00 TO 50.00 PERCENT SINGLE SECTION


Click here to Register for Free 30-day Trial