| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 |
| BODY HEIGHT | 0.090 INCHES NOMINAL |
| BODY LENGTH | 0.290 INCHES NOMINAL |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.290 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 1800.000 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| PROPRIETARY CHARACTERISTICS | PACS |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.000 |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 |
| RELIABILITY INDICATOR | ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20/36 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | SELECTED ITEM |
| TERMINAL DIAMETER | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 81349-MIL-C-20/36 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 98230-0N365364 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00/+2.00 PERCENT SINGLE SECTION |