|
|
|
National Stock Number:
5910-01-221-8080
Federal Supply Class:
5910
National Item Identification Number:
012218080
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 39176 | 0SML3 | AERO INTERNATIONAL, LLC | | 39176 | 64547 | HONEYWELL INTERNATIONAL, INC | | 39176 | 70210 | HONEYWELL INTERNATIONAL INC. | | EA4006 | 12406 | ELPAC ELECTRONICS INC | | GF-8212 | 07294 | GENISCO FILTER CORP | | GF-8212 | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | GMYER4200-2 | 00853 | CORNELL-DUBILIER MARKETING INC | | GMYER4200-2 | 14655 | CORNELL-DUBILIER ELECTRONICS | | RC00612 | 13619 | EMS DEVELOPMENT CORPORATION | | RC612 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 2.020 INCHES NOMINAL | | BODY LENGTH | 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.880 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 2.400 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 800.0 MEGOHMS | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 93.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 AC-RMS SINGLE SECTION | | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|