5910-01-214-6849, CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-214-6850 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5910-01-214-6849

Federal Supply Class:
5910

National Item Identification Number:
012146849

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

715P103516LD3

56289

SPRAGUE ELECTRIC CO WORLD HQS

Techincal Specification:

BODY DIAMETER	0.700 INCHES MAXIMUM
BODY LENGTH	1.300 INCHES MAXIMUM
BODY STYLE	W/O MTG FACILITIES, RADIAL TERMINALS
CAPACITANCE VALUE PER SECTION	0.010 MICROFARADS SINGLE SECTION
CASE MATERIAL	PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.719 INCHES NOMINAL
DIELECTRIC MATERIAL	PLASTIC
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.1000
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	500.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP	50000.0 MEGOHM-MICROFARADS
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	1600.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP	25.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	180.0 SINGLE SECTION
TERMINAL DIAMETER	0.032 INCHES NOMINAL
TERMINAL LENGTH	1.250 INCHES MINIMUM
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION

Click here to Register for Free 30-day Trial