5910-01-030-7650 CAPACITOR,FIXED,PAPER DIELECTRIC Index 5910-01-030-7652 CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5910-01-030-7651

Federal Supply Class:
5910

National Item Identification Number:
010307651

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.


Manufacturer Information:
0160-42011LQK8KEYSIGHT TECHNOLOGIES, INC.
0160-420128480HEWLETT-PACKARD COMPANY
0160-42017ZXR5KEYSIGHT TECHNOLOGIES INC
HEW37084411AMERICAN SHIZUKI CORP


Techincal Specification:
BODY HEIGHT1.656 INCHES MAXIMUM
BODY LENGTH2.000 INCHES MAXIMUM
BODY STYLEW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH2.000 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION8.000 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH1.688 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.375 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED MOUNTING HOLES
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION200.0 DC SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-250.0 SINGLE SECTION
TERMINAL LENGTH0.750 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY2 TAB, SOLDER LUG
TERMINAL SURFACE TREATMENTSOLDER
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
UNTHREADED MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL


Click here to Register for Free 30-day Trial