|
|
|
National Stock Number:
5910-01-027-9478
Federal Supply Class:
5910
National Item Identification Number:
010279478
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 120512001 | 31795 | EATON CORPORATION | | 2182128-1 | 55939 | HONEYWELL INTL DBA HONEYWELL DIV BUSINESS AND GENERAL AVIATION | | 225P10494XD3 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 61F664 | 01002 | GENERAL ELECTRIC CO CAPACITORS DIV | | DMT4P1 | 14655 | CORNELL-DUBILIER ELECTRONICS |
|
Techincal Specification:
| BODY HEIGHT | 0.520 INCHES MAXIMUM | | BODY LENGTH | 0.800 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.840 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.613 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC POLYESTER | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.7500 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1500.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 25000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 400.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|