| BODY DIAMETER | 0.959 INCHES MINIMUM AND 1.051 INCHES MAXIMUM |
| BODY LENGTH | 1.266 INCHES MINIMUM AND 1.358 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| CAPACITANCE VALUE PER SECTION | 460.000 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 2.126 INCHES MINIMUM AND 2.246 INCHES MAXIMUM |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.5000 |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHMS |
| MOUNTING SLOT WIDTH | 0.187 INCHES NOMINAL |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30000.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | 120.0 CELSIUS MAXIMUM |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 10.0000 |
| QUALITY FACTOR AT REFERENCE TEMP | 70.0000 |
| RELIABILITY INDICATOR | ESTABLISHED |
| VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | -60.0 TO 100.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| TERMINAL HEIGHT FROM BODY | 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.164 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 97942-138C308 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -20.00 TO 80.00 PERCENT SINGLE SECTION |