|
|
|
National Stock Number:
5910-01-017-4120
Federal Supply Class:
5910
National Item Identification Number:
010174120
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 10128136 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 6M500-103B | 58364 | BYCAP INC | | 933-1085-580 | 13499 | ROCKWELL COLLINS, INC. | | 933-1085-580 | F5491 | ROCKWELL COLLINS FRANCE | | F331A1002J050 | 05397 | UNION CARBIDE CORP MATERIALS SYSTEMS DIV | | F331A1002J050 | 31433 | KEMET ELECTRONICS CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 0.280 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | BODY WIDTH | 0.125 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | CAPACITANCE VALUE PER SECTION | 0.010 MICROFARADS SINGLE SECTION | | CASE MATERIAL | PLASTIC | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.400 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.3000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.020 INCHES NOMINAL | | TERMINAL LENGTH | 1.250 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|