|
|
|
National Stock Number:
5910-01-005-9365
Federal Supply Class:
5910
National Item Identification Number:
010059365
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 860517-1 | 04971 | RANTEC MICROWAVE SYSTEMS, INC. | | 860517-1 | 60132 | RANTEC POWER SYSTEMS INC. | | LIT-5 | 81483 | INFINEON TECHNOLOGIES AMERICAS CORP | | W21089 | 96733 | SFE TECHNOLOGIES | | W21089-1 | 96733 | SFE TECHNOLOGIES |
|
Techincal Specification:
| BODY HEIGHT | 0.375 INCHES MAXIMUM | | BODY LENGTH | 0.875 INCHES MAXIMUM | | BODY WIDTH | 0.250 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | CAPACITANCE VALUE PER SECTION | 0.027 MICROFARADS SINGLE SECTION | | CASE MATERIAL | PLASTIC | | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHM-MICROFARADS | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 600.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.630 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT SINGLE SECTION |
|
|