|
|
|
National Stock Number:
5910-01-003-5307
Federal Supply Class:
5910
National Item Identification Number:
010035307
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 13220E3937 | 97403 | CECOM LR CENTER | | MFP05P22 | 00853 | CORNELL-DUBILIER MARKETING INC | | MFP05P22-10 | 00853 | CORNELL-DUBILIER MARKETING INC | | WMF05P22 | 00853 | CORNELL-DUBILIER MARKETING INC | | WMF05P22 | 14655 | CORNELL-DUBILIER ELECTRONICS | | WMF05P22 | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. | | WMF05P22K-F | 00853 | CORNELL-DUBILIER MARKETING INC |
|
Techincal Specification:
| BODY DIAMETER | 0.362 INCHES MAXIMUM | | BODY LENGTH | 0.875 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.220 MICROFARADS SINGLE SECTION | | CASE MATERIAL | PLASTIC | | DIELECTRIC MATERIAL | PLASTIC POLYESTER | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 6000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|