| BODY HEIGHT | 0.100 INCHES NOMINAL |
| BODY LENGTH | 0.200 INCHES NOMINAL |
| BODY WIDTH | 0.200 INCHES NOMINAL |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CAPACITANCE VALUE PER SECTION | 220.000 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.2000 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | -5.0 TO 5.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 28528-2432850G10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |