| BODY HEIGHT | 0.156 INCHES NOMINAL |
| BODY LENGTH | 0.375 INCHES NOMINAL |
| BODY WIDTH | 0.188 INCHES NOMINAL |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| CAPACITANCE VALUE PER SECTION | 30.000 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | GLASS |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.300 INCHES NOMINAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0020 |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10.0 MEGOHM-MICROFARADS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100.0 MEGOHM-MICROFARADS |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| QUALITY FACTOR AT REFERENCE TEMP | 2000.0000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-11272/5B GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 105.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 81349-MIL-C-11272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO 25.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |