|
|
|
National Stock Number:
5910-00-968-4476
Federal Supply Class:
5910
National Item Identification Number:
009684476
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 10049020-26 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | TWU1S14P5-5 | 00853 | CORNELL-DUBILIER MARKETING INC | | TWU1S14P5-5 | 14655 | CORNELL-DUBILIER ELECTRONICS |
|
Techincal Specification:
| BODY DIAMETER | 0.253 INCHES MAXIMUM | | BODY HEIGHT | 0.253 INCHES MAXIMUM | | BODY LENGTH | 0.906 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | BODY WIDTH | 0.253 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 10000.000 PICOFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INTERNAL ELECTRICAL CONNECTION TYPE | INSERTED TAB | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 150.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 18000.0 MEGOHMS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -45.0 FAHRENHEIT MINIMUM AND 145.0 FAHRENHEIT MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.578 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 18876-100-49020 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|