| BODY HEIGHT | 1.470 INCHES NOMINAL |
| BODY LENGTH | 2.030 INCHES NOMINAL |
| BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.940 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 12000.000 PICOFARADS SINGLE SECTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.375 INCHES NOMINAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 |
| HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 3000.0 |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10.0 MEGOHM-MICROFARADS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 7500.0 MEGOHMS |
| LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 100.0 |
| MATERIAL | PLASTIC CASE |
| MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS | 11.0 |
| MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS | 3.0 |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1000.0 AC-PEAK SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 70.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | +0.0 TO 70.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MILC5/11 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MILC-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.170 INCHES NOMINAL |