|
|
|
National Stock Number:
5910-00-782-5003
Federal Supply Class:
5910
National Item Identification Number:
007825003
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 602-6839W2 | 84411 | AMERICAN SHIZUKI CORP | | 6026839W2 | 84411 | AMERICAN SHIZUKI CORP | | BM5 | 84411 | AMERICAN SHIZUKI CORP | | PC4852-6 | 09344 | ROCKWELL COLLINS, INC. DBA RC DISPLAYS SYSTEMS |
|
Techincal Specification:
| BODY HEIGHT | 0.260 INCHES MAXIMUM | | BODY LENGTH | 0.575 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.480 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 68000.000 PICOFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.435 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 75000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.040 INCHES NOMINAL | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 09344-PC4852-6 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|