| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| ADJUSTMENT DEVICE TORQUE | 4.000 INCH-OUNCES MINIMUM AND 20.000 INCH-OUNCES MAXIMUM |
| BODY HEIGHT | 0.375 INCHES NOMINAL |
| BODY LENGTH | 0.844 INCHES NOMINAL |
| BODY STYLE | ROTARY |
| BODY WIDTH | 0.656 INCHES NOMINAL |
| CAPACITANCE DRIFT IN PICOFARADS | 0.50 SINGLE SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +11.0 TO 110.0 SINGLE SECTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.438 INCHES NOMINAL |
| INCLOSURE TYPE | ENCAPSULATED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 10.0 GIGOHMS |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 500.0 DC CONTINUOUS SINGLE SECTION |
| QUALITY FACTOR AT 25 DEG CELSIUS | 500.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | -1500.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 13499-917-1248-010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |