|
|
|
National Stock Number:
5910-00-710-8261
Federal Supply Class:
5910
National Item Identification Number:
007108261
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 10186013-15 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 601PE1042.5 STYLE4 | 84411 | AMERICAN SHIZUKI CORP | | 67F149G8 | 01002 | GENERAL ELECTRIC CO CAPACITORS DIV | | MD5R104G | 12406 | ELPAC ELECTRONICS INC |
|
Techincal Specification:
| BODY HEIGHT | 0.235 INCHES MAXIMUM | | BODY LENGTH | 0.650 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.525 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.556 INCHES NOMINAL | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 25000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.000 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|