| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 2 SHAFT |
| ADJUSTMENT DEVICE ROTATION | 240.0 DEGREES NOMINAL COUNTERCLOCKWISE |
| ADJUSTMENT DEVICE TORQUE | 5.000 INCH-OUNCES MINIMUM AND 20.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 2.000 INCHES NOMINAL |
| BODY STYLE | PLATE-MESHING |
| CAPACITANCE RANGE IN PICOFARADS | +7.0 TO 35.7 ALL SECTIONS |
| INCLOSURE TYPE | UNINCLOSED |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL HEIGHT | 2.000 INCHES NOMINAL |
| OVERALL LENGTH | 3.500 INCHES NOMINAL |
| OVERALL WIDTH | 2.218 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| NONDERATED VOLTAGE RATING AND TYPE | 350.0 AC RMS FIRST SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 500.0 AC RMS SECOND SECTION |
| PLATE QUANTITY | 35 |
| SHAFT DIAMETER | 0.265 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 40.0 ALL SECTIONS |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 16786-+450000500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2B |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -20.0 TO 10.0 ALL SECTIONS |
| TUNING CHARACTERISTIC | TABLE ALL SECTIONS |