5910-00-679-1988, CAPACITOR,FIXED,PAPER DIELECTRIC

5910-00-679-1987 CAPACITOR,FIXED,PAPER DIELECTRIC

5915-00-679-1989 FILTER,RADIO FREQUENCY INTERFERE

National Stock Number:
5910-00-679-1988

Federal Supply Class:
5910

National Item Identification Number:
006791988

Description:
CAPACITOR,FIXED,PAPER DIELECTRIC

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

9072175	18876	U S ARMY AVIATION AND MISSILE COMMAND
9190985	18876	U S ARMY AVIATION AND MISSILE COMMAND
MYR-168	00853	CORNELL-DUBILIER MARKETING INC
MYR-168	14655	CORNELL-DUBILIER ELECTRONICS
XR202	00853	CORNELL-DUBILIER MARKETING INC
XR202	14655	CORNELL-DUBILIER ELECTRONICS

Techincal Specification:

BODY HEIGHT	0.812 INCHES NOMINAL
BODY LENGTH	1.812 INCHES NOMINAL
BODY STYLE	W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH	1.000 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION	0.400 MICROFARADS SINGLE SECTION
CASE INSULATION MATERIAL	PAPER
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.062 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.125 INCHES NOMINAL
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	20.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP	2000.0 MEGOHM-MICROFARADS
MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED MOUNTING HOLES
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	220.0 AC-RMS SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL HEIGHT FROM BODY	0.500 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG
TERMINAL SURFACE TREATMENT	SOLDER
TOLERANCE RANGE PER SECTION	-5.00 TO 10.00 PERCENT SINGLE SECTION
UNTHREADED MOUNTING HOLE DIAMETER	0.188 INCHES NOMINAL

Click here to Register for Free 30-day Trial