5910-00-669-2726, CAPACITOR,FIXED,PAPER DIELECTRIC

5910-00-669-2729 CAPACITOR,FIXED,PAPER DIELECTRIC

National Stock Number:
5910-00-669-2726

Federal Supply Class:
5910

National Item Identification Number:
006692726

Description:
CAPACITOR,FIXED,PAPER DIELECTRIC

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

CP10A3EE474M	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-25/1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC25-1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY DIAMETER	0.670 INCHES NOMINAL
BODY LENGTH	1.812 INCHES NOMINAL
BODY STYLE	W/MTG BRACKET, AXIAL TERMINALS
CAPACITANCE VALUE PER SECTION	0.470 MICROFARADS SINGLE SECTION
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.0000
FEATURES PROVIDED	HERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	20.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP	2000.0 MEGOHM-MICROFARADS
MOUNTING FACILITY TYPE AND QUANTITY	1 UNTHREADED MOUNTING HOLES
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	400.0 DC SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
TERMINAL LENGTH	1.625 INCHES NOMINAL
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TOLERANCE RANGE PER SECTION	-20.00 TO 20.00 PERCENT SINGLE SECTION
UNTHREADED MOUNTING HOLE DIAMETER	0.156 INCHES NOMINAL

Click here to Register for Free 30-day Trial