| BODY DIAMETER | 0.562 INCHES NOMINAL |
| BODY HEIGHT | 1.000 INCHES NOMINAL |
| BODY LENGTH | 1.125 INCHES NOMINAL |
| BODY STYLE | W/MTG BRACKET, AXIAL TERMINALS |
| BODY WIDTH | 0.562 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION |
| CASE MATERIAL | METAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| INTERNAL ELECTRICAL CONNECTION TYPE | INSERTED TAB |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 20.0 MEGOHM-MICROFARADS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 2000.0 MEGOHM-MICROFARADS |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 UNTHREADED MOUNTING HOLES |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| SPECIAL FEATURES | PLATED 40 TO 70 PCT TIN CONTENT |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-25/1F GOVERNMENT SPECIFICATION |
| TERMINAL DIAMETER | 0.032 INCHES NOMINAL |
| TERMINAL LENGTH | 1.625 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |