5910-00-165-2723 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5910-00-165-2725 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5910-00-165-2724

Federal Supply Class:
5910

National Item Identification Number:
001652724

Description:
CAPACITOR,FIXED,MICA DIELECTRIC

Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.


Manufacturer Information:
CM70FN391GM181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-5/1281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC5-1281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CAPACITANCE VALUE PER SECTION390.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION5000.0 AC-PEAK SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS0.0 TO 70.0 SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND
70.0 DEG CELSIUS MAXIMUM
BODY STYLEW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY LENGTH2.280 INCHES NOMINAL
BODY WIDTH1.270 INCHES NOMINAL
BODY HEIGHT2.250 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY2 THREADED STUD
TERMINAL LENGTH0.469 INCHES NOMINAL
TERMINAL DIAMETER0.190 INCHES NOMINAL
CASE MATERIALPLASTIC
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED MOUNTING HOLES
UNTHREADED MOUNTING HOLE DIAMETER0.200 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.625 INCHES NOMINAL
INSULATION RESISTANCE AT REFERENCE TEMP7500.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.3500
RELIABILITY INDICATORNOT ESTABLISHED
TEST DATA DOCUMENT81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-C-5/12 GOVERNMENT SPECIFICATION
MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS4.3
HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ3000.0
MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS0.68
LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ100.0
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP2000.0 MEGOHMS
SPEC/STD CONTROLLING DATA
DEFINITIVE GOVERNMENT SPEC/STD REFERENCECM70FN391GM1
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-C-5/12


Click here to Register for Free 30-day Trial