|
|
|
National Stock Number:
5910-00-156-5782
Federal Supply Class:
5910
National Item Identification Number:
001565782
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 441-1033-045 | 94756 | THE BOEING COMPANY | | TWPP111-045 | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. |
|
Techincal Specification:
| BODY DIAMETER | 0.828 INCHES MAXIMUM | | BODY LENGTH | 2.251 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.680 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | CASE MATERIAL | METAL | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 40000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 SINGLE SECTION | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 94756-441-1033 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
|
|