|
|
|
National Stock Number:
5910-00-144-1760
Federal Supply Class:
5910
National Item Identification Number:
001441760
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 103P541 | 01884 | EXXELIA USA, INC. | | 103P541 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 7902712-08 | 90536 | LOCKHEED MARTIN CORP | | NFTH1P68S | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. |
|
Techincal Specification:
| BODY DIAMETER | 0.562 INCHES NOMINAL | | BODY LENGTH | 1.880 INCHES NOMINAL | | BODY STYLE | W/THD BUSHING MTG, TERMINALS ON OPPOSITE ENDS | | CAPACITANCE VALUE PER SECTION | 0.680 MICROFARADS SINGLE SECTION | | CASE MATERIAL | METAL | | CONTINUOUS CURRENT RATING IN AMPS | 5.0 | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 30000.0 MEGOHMS | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.312 INCHES | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | FEEDTHROUGH | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 90536-7902712 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT SINGLE SECTION |
|
|