|
|
|
National Stock Number:
5910-00-139-1824
Federal Supply Class:
5910
National Item Identification Number:
001391824
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 225P47491XA3 | 49588 | S B E, INC. | | 225P4749R75ZD2 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 418969-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | W22226 | 32159 | WEST CAP ARIZONA |
|
Techincal Specification:
| BODY HEIGHT | 0.590 INCHES MAXIMUM | | BODY LENGTH | 0.750 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.830 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION | | CASE MATERIAL | PLASTIC | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 25.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 25000.0 MEGOHM-MICROFARADS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 75.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | SPECIAL FEATURES | HOCKEYSTICK CRIMPED LEADS | | TERMINAL LENGTH | 0.437 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|