|
|
|
National Stock Number:
5905-01-588-5852
Federal Supply Class:
5905
National Item Identification Number:
015885852
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 6186-R10K-L1.0-ST | 73138 | BI TECHNOLOGIES CORPORATION | | KN003125 | 34228 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM | | BODY LENGTH | 0.455 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CAGE: 7/8 IN. DIA. SINGLE TURN CONDUCTIVE PLASTIC PRECISION POTENTIOMETER/POSITION SENSOR, 1/8 IN. SHAFT, 3/8 IN. BUSHING | | MOUNTING BUSHING LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.891 INCHES MAXIMUM | | SPECIAL FEATURES | HAS STOP | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TURRET |
|
|