|
|
|
National Stock Number:
5905-01-564-1141
Federal Supply Class:
5905
National Item Identification Number:
015641141
Description:
RESISTOR,CHIP,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| D55342E07B75D0R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M55342/07 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M55342E07B75D0R | 91637 | VISHAY DALE ELECTRONICS, LLC | | MIL-PRF-55342/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | R1206F75R0J | 03640 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 75.000 OHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.015 INCHES MINIMUM AND 0.033 INCHES MAXIMUM | | BODY LENGTH | 0.118 INCHES MINIMUM AND 0.134 INCHES MAXIMUM | | BODY WIDTH | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | | INCLOSURE METHOD | ENCAPSULATED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: RESISTOR, CHIP, 75.0 OHMS; MFR: QPL MIL-PRF-55342 QUALIFIED THIN FILM RESISTOR CHIPS | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 | | RELIABILITY INDICATOR | ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | TERMINATION PAD EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -25.0 TO 25.0 | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE |
|
|