5305-01-483-7520 SCREW,MACHINE Index 5340-01-483-7522 RECEPTACLE,FRICTION CATCH STUD

National Stock Number:
5905-01-483-7521

Federal Supply Class:
5905

National Item Identification Number:
014837521

Description:
RESISTOR,FIXED,FILM

Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.


Manufacturer Information:
MIL-PRF-39017/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RLR07C1R00GR81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE1.000 OHMS
AMBIENT TEMP AT FULL RATED POWER70.0 CELSIUS
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER150.0
BODY DIAMETER0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
BODY LENGTH0.204 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
INCLOSURE TYPEENCAPSULATED
MIL-STD-1276 WIRE LEAD TYPE DESIGNATORC
POWER DISSIPATION RATING IN WATTS0.250 FREE AIR
RESISTANCE TOLERANCE IN PERCENT-5.000 TO 5.000
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.010
RELIABILITY INDICATORESTABLISHED
UNPACKAGED UNIT WEIGHT0.5 GRAMS
SPECIFICATION/STANDARD DATA81349-MIL-PRF-39017/1 GOVERNMENT SPECIFICATION
STYLE DESIGNATORAXIAL TERMINAL EACH END
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-100.0 TO 100.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 150.0
TERMINAL LENGTH1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
TERMINAL TYPEWIRE LEAD
TEST DATA DOCUMENT81349-MIL-PRF-39017 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial