|
|
National Stock Number: 5905-01-483-2905
Federal Supply Class: 5905
National Item Identification Number: 014832905
Description: RESISTOR,CHIP,FIXED,FILM
Detail: A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
M55342K05B604DP | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-PRF-55342/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
ELECTRICAL RESISTANCE | 604.000 OHMS | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | BODY HEIGHT | 0.015 INCHES MINIMUM AND 0.033 INCHES MAXIMUM | BODY LENGTH | 0.223 INCHES MINIMUM AND 0.237 INCHES MAXIMUM | BODY WIDTH | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | INCLOSURE METHOD | UNINCLOSED | POWER DISSIPATION RATING IN WATTS | 0.225 FREE AIR | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 | RELIABILITY INDICATOR | ESTABLISHED | SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-55342/5 GOVERNMENT SPECIFICATION | STYLE DESIGNATOR | TERMINATION PAD EACH END | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | TERMINAL LENGTH | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | TEST DATA DOCUMENT | 81349-MIL-PRF-55342 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|