|
|
|
National Stock Number:
5905-01-351-3645
Federal Supply Class:
5905
National Item Identification Number:
013513645
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 301487-00E | 57272 | DATA ENTRY PRODUCTS | | G225352-7 | 3B150 | RAYTHEON COMPANY | | G225352-7 | 49956 | RAYTHEON COMPANY | | G225352-7 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.200 KILOHMS LOWEST RESISTANCE VALUE47.000 KILOHMS HIGHEST RESISTANCE VALUE2.200 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE22.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.332 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | BODY LENGTH | 0.568 INCHES MINIMUM AND 0.598 INCHES MAXIMUM | | BODY WIDTH | 0.050 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE2 HIGHEST RESISTANCE VALUE1 1ST INTERMEDIATE RESISTANCE VALUE1 2ND INTERMEDIATE RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.000 TOTAL NETWORK | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | SINGLE INLINE | | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | TERMINAL QUANTITY | 6 | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TEST DATA DOCUMENT | 49956-225352 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|