|
|
National Stock Number: 5905-01-349-9502
Federal Supply Class: 5905
National Item Identification Number: 013499502
Description: RESISTOR,FIXED,WIRE WOUND,NONIND
Detail: INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
6133997-1 | 03640 | LOCKHEED MARTIN CORPORATION | EGN-10-3 1 OHM 5PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | EGN10X003D1R000J | 91637 | VISHAY DALE ELECTRONICS, LLC | MIL-PRF-39007/10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-R-39007/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | RWR84N1R00FS | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
ELECTRICAL RESISTANCE | 1.000 OHMS | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | BODY DIAMETER | 0.156 INCHES MINIMUM AND 0.218 INCHES MAXIMUM | BODY LENGTH | 0.498 INCHES MINIMUM AND 0.622 INCHES MAXIMUM | INCLOSURE TYPE | ENCAPSULATED | POWER DISSIPATION RATING IN WATTS | 7.000 FREE AIR | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 | RELIABILITY INDICATOR | ESTABLISHED | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39007/11 GOVERNMENT SPECIFICATION | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | TERMINAL LENGTH | 1.500 INCHES MINIMUM | TERMINAL TYPE | WIRE LEAD | TEST DATA DOCUMENT | 81349-MIL-R-39007 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|