|
|
|
National Stock Number:
5905-01-349-4166
Federal Supply Class:
5905
National Item Identification Number:
013494166
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 1720M44P04 | 66464 | GENERAL ELECTRIC CO | | MIL-PRF-55182/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-55182/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RNC90Y40K000VR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S102C40K000V | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 40.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.336 INCHES MAXIMUM | | BODY LENGTH | 0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | BODY WIDTH | 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | C | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.005 TO 0.005 | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 | | RELIABILITY INDICATOR | ESTABLISHED | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-55182/9 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +125.0 TO 175.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.875 INCHES MINIMUM AND 1.875 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 81349-MIL-R-55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|