5905-01-346-4070 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-01-346-4072 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-346-4071

Federal Supply Class:
5905

National Item Identification Number:
013464071

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
311-2325-0080009TEKTRONIX, INC.
CM4521312697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION210.0 MINIMUM AND 220.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
BODY HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
BODY LENGTH1.359 INCHES MINIMUM AND 1.422 INCHES MAXIMUM
BODY STYLERECTANGULAR BUSHING MOUNTED
BODY WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
FEATURES PROVIDEDSWITCH
III CUBIC MEASURE0.401 CUBIC INCHES
III FRAGILITY FACTORMODERATELY RUGGED
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE5.50 INCH-OUNCES
MAXIMUM STARTING TORQUE5.50 INCH-OUNCES
MOUNTING BUSHING LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING AND TAB
SPECIAL FEATURESADDITIONAL SWITCHES; SECOND SWITCH: ROTARY,SPDT,DETENT AT CLOCKWISE END; 125 MILLIAMPS MAX,28 VOLTS DC MAX; THIRD SWITCH: ROTARY,SPDT,DETENT AT COUNTERCLOCKWISE END; 125 MILLIAMPS MAX,28 VOLTS DC MAX
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT BEARING TYPESLEEVE
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SWITCH OPERATING POSITIONEND OF ROTATION
SWITCH TYPEROTARY
SWITCH VOLTAGE RATING IN VOLTS28.0
SWITCH CONTACT ARRANGEMENTSINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS125.000 DC
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY12 PIN


Click here to Register for Free 30-day Trial