|
|
|
National Stock Number:
5905-01-345-1415
Federal Supply Class:
5905
National Item Identification Number:
013451415
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 106224 | 89536 | FLUKE CORP | | 5322 101 24029 | H0002 | PHILIPS ELECTRONICS NEDERLAND B.V. | | 70M1G056R502Y | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY HEIGHT | 0.610 INCHES NOMINAL | | BODY LENGTH | 0.562 INCHES MINIMUM AND 0.624 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.610 INCHES NOMINAL | | FEATURES PROVIDED | HUMIDITY PROOF | | III CUBIC MEASURE | 0.232 CUBIC INCHES | | III FRAGILITY FACTOR | MODERATELY RUGGED | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|